CreatBot DE Plus - Dual Extruder 1.75mm

CreatBot DE Plus - Dual Extruder 3D Printer with Large Build Space and Bowden Setup

The CreatBot DE Plus is a solidly constructed 3D printer with two print heads, a closed build chamber with transparent walls, a heated glass print bed and a Bowden extruder. The extruders have two stepper motors positioned at the rear of the machine. This design guides a very light 3D print head, enabling high-speed 3D printing. The CreatBot DE manufactures with PLA and ABS as well as other filaments including soluble HIPS and PVA. This 3D printer is a great system for engineering and education. Create multiple objects for production work, large architectural models, sculptures, jigs and templates with the DE+.

Product highlights of CreatBot DE Plus:

• All metal chassis

Product highlights of CreatBot DE Plus:

Smart adjustable extruder

Product highlights of CreatBot DE Plus:

• Automatically shutdown after work is done
• Multi-function keypad
• Gear motors feeder
• Ceramic panel hot bed
• Metal hot bed tray
• Large build volume of 400 x 300 x 520 mm
• High resolution up to 0.04 mm
• Filament detection system
• 3D Print in temperatures up to 260 ° C
• Simply continue 3D print in case of power loss
• All enclosed build space 

All metal chassis

A 3D printer needs a firm weight to insure stable operation. Therefore, all metal chassis are the best way to go when it comes to 3D printing.

Smart adjustable extruder

CreatBot DE Plus extruders include an intelligent cooling system. This ensures that the filament is feeding at the optimal temperature all the time. The height adjustable nozzles allow you to align your two nozzles very quick and easy. Perfect when you want to 3D print with support, varied materials or just two colors. All CreatBots from 3D Prima come with dual extruders as standard.

Automatically shutdown

Your CreatBot DE Plus is equipped with a power management module. When the 3D print is finished and there is no action taken within 5 minutes this 3D printer will shut down. Very useful and very energy efficient.

Multi-function key pad

CreatBot DE Plus has a multi-function keyboard. This makes for very easy handling and direct access to many of the most used functions, including Z shaft up/down, heating/cooling of hot bed, pause, resume 3D print, browse the SD card and more.

Gear motors feeder

A gear motor can produce more torque compared to the general stepper motor, this ensures that there is a smooth feeding of the filament always and that retraction is perfect.

Ceramic panel hot bed

On top of a silica heating plate there is a stunning ceramic hot bed which is more expensive then glass but also provides a better heating distribution and a more even heat. The ceramic plate is very smooth and provides a very good adhesion.

Metal hot bed tray

An all metal hot bed tray makes for a very stable 3D print platform which in turn improves stability.

Large build volume

The DE+ impresses with its massive build volume of 400 x 300 x 520 mm. That size is more than enough for most makers. This means that you can additive manufacture your creations in 52 cm height and with a resolution of 0.04 mm.

Filament detection system

If you should run out of filament during a 3D print, don't worry. The 3D printer will go into pause mode and let you change the filament - then you just hit resume, easy!

High temperature 3D prints

The nozzles can operate in temperatures up to 260 ° C. This means that you can use a wide range of different filaments. It also provides you with a very stable temperature during production.

All enclosed build space

On the CreatBot DE Plus you have a totally enclosed build space which prevents large 3D prints from being cracked or warped.

In the box

• CreatBot DE+ with dual extruders
• Packed in a wood crate
• 1 x SD card
• 1 x USB cable
• 1 x Power cable
• 1 x Tool kit
• 1 x Manual
• 2 x spools of 1 kg 1.75 mm filament
• Cura software on SD card

If you want a large volume dual extruder 3D printer with a bowden setup buy the CreatBot DE Plus.

*Please note that ABS, PC and Nylon needs a heated chamber so only small items can be printed.