LayFilaments Laywood-Flex - 1.75mm - 0,25 kg

Lay-FilamentsSKU:20654
filler

Prijs:
Actie prijs£26.00
Voorraad:
Op voorraad. Levertijd 3-6 werkdagen

Beschrijving

LAYFILAMENTS LAYWOOD-FLEX

Laywood prints are otherwise quite rigid with high tensile strength and tend to break faster, but Laywood-Flex has a higher elasticity with slightly lower tensile strength.

As Kai points out: "More than 2 years has gone and some more filaments have been developed in my garage and I wanted to come back to LAYWOOD (TM) again, making it better or more flexible as some sorts of wood in real nature are also bendable. So I added some flexibilizers and got a proper result which is in sum a thermoplastic polymer-composite, made from harmless ingredients."

You can see the FLEX filament in the clip above. In a nutshell, LAYWOOD has a higher tensile strength, but will break under enough pressure. LAYWOOD-FLEX, meanwhile, has a lower tensile strength, but has a far higher degree of elasticity. Perfect for 3D printing belts, imitations of wooden decorations or even small pieces of furniture (and whatever else your making mind comes up with).
  • No (or minimal) warping
  • Rough or smooth surfaces that can be sanded
  • 3D printable tree-rings (185 to 255°C) are possible, depending on temperature and printing speeds. Elasticity will be higher on darker layers.
  • Sticks well to ABS-paint on cold platforms or blue tape.
  • Print directly on capton-tape with a 50°C platform .
  • Contains ~ 35 % recycled wood, as well as harmless binders made by co-polyesters.
  • Nozzle: 0.5 mm.

Betaling en beveiliging

American Express Apple Pay Google Pay PayPal Shop Pay Union Pay

Je betalingsgegevens worden veilig verwerkt. We slaan geen gegevens op en hebben geen toegang tot uw gegevens.

Op basis van jou intreresses

Recently viewed