CreatBot DE Plus - Triple Extruder 1.75mm

CreatBot DE Plus – Dual extruder 3D printer with large build volume and Bowden setup

Size does matter! The CreatBot DE Plus Triple Extruder is a solidly constructed 3D printer with three print heads, an enclosed build chamber with see-through walls, a heated glass print bed and a Bowden extruder. The extruders have two stepper motors positioned at the rear of the machine. This design guides a very light 3D print head, enabling high-speed 3D printing. The CreatBot DE works with PLA and ABS as well as other filaments including soluble HIPS and PVA. This 3D printer is a great system for engineering and education. Create multiple objects for production work, large architectural models, sculptures, jigs and templates with the DE+ Triple extruder.

Key Product Features CreatBot DE Plus Triple Extruder:

• Fully enclosed metal housing
• Intelligently adjustable triple extruder
• Automatically shuts off after the job is done
• Multifunctional keyboard
• Filament feeder with gear wheel
• Ceramic heating bed
• Basic structure of the build platform
• Large construction space of 400 x 300 x 520 mm
• High resolution up to 0.04 mm
• Filament recognition system
• Fabricate at temperatures up to 260 °C
• Simply continue 3D printing in case of power failure
• Completely enclosed installation space

Large 3D printer with sturdy metal housing

A 3D printer needs a certain amount of weight to ensure stable operation. That's why all-metal enclosures are the best solution for your 3D printer.

Intelligently adjustable extruder

CreatBot extruders have an intelligent cooling system. This ensures that the filament is at the optimum temperature all the time. Thanks to the height adjustability, you can align the two nozzles very quickly and easily. Perfect if you want to print complex 3D prints with support material, different materials or two colours. All CreatBots from 3D Prima are equipped with two extruders as standard.

Automatic shutdown

Your CreatBot DE Plus is equipped with a power management module. When your 3D printing is finished and you do not perform any action within 5 minutes, the 3D printer will shut down. This device is very useful and energy efficient. Save on energy costs.

3D printer with multifunction keyboard

The CreatBot DE Plus Triple Extruder has a multifunctional keyboard. This allows very easy handling and direct access to many of the most commonly used functions, including Z-axis up and down, heating, cooling the heating bed, pausing and resuming your 3D prints. Navigate through the folders on your SD card and use other features.

Feeder with gear

A motor with a gear can generate more torque than a conventional stepper motor. This ensures that the filament is always fed evenly and the retraction is perfect.

Hot ceramic print bed

On top of a silica heating plate is an amazing ceramic heating bed. It is higher quality than glass and delivers better heat distribution and therefore more even heat. The ceramic plate is very smooth and provides very good adhesion.

Metal frame for the hot-bed

A full metal frame for the hot-bed provides a very stable 3D printing platform, which in turn improves stability.

Large build volume

The DE+ with three extruders impresses with its enormous build volume of 400 x 300 x 520 mm. This size is more than enough for most manufacturers. This means that you can additively produce your creations with a height of 52 cm and a resolution of 0.04 mm.

Filament detection system

If you run out of filament during a 3D print, don't worry. Your 3D printer will go into pause mode and you can change the filament. Then press the resume button and continue with the production. 3D printing is easy with the CreatBot DE Plus Triple Extruder!

High temperature 3D printer

You can run the nozzle at temperatures up to 260°C. This means you have a wide range of choices. This means you can use a wide range of different filaments. The Nozzle maintains a very stable temperature throughout the additive manufacturing process.

Continue 3D printing

If an unexpected loss of power occurs, the CreatBot DE Plus remembers the last known position, stores it, lowers the build platform and retracts the filament. When the power returns, you can continue 3D printing.

Fully enclosed build space

With the CreatBot DE Plus you get a completely enclosed build space. This prevents large 3D prints from peeling or warping (no warping).

Included in delivery:

• CreatBot DE+ with three extruders
• Packed in a wooden box
• 1 x SD card
• 1 x USB cable
• 1 x power cable
• 1 x tool kit
• 1 x user manual
• 2 x spools with 1 kg 1,75 mm filament
• Cura software on SD card

If you want a cheap large volume triple extruder 3D printer, buy the CreatBot DE Plus. It has an enclosed build space.