BASF Ultrafuse PLA

Ultrafuse PLA is Poly-Lactic-Acid, a biodegradable polymer with a low melting point. It is an easy material to print with and Ultrafuse PLA gives a smooth printing result. This most used 3D printing material is available in a wide range of RAL colors and translucent variants.

When properly cooled, PLA has a higher maximum printing speed, lower layer heights, and sharper printed corners. Combining this with low warping of the print makes it a popular plastic for makers, prosumers and schools.

• Print Temperature: 210-220 degrees
• Heated Bed: 60 degrees
• Print Speed: 30-80 mm/s

• Tensile Strength (MPa): 21.2 (ZX), 34.7 (XY)
• Flexural Modulus (MPa): 1715 (ZX), 1708 (XZ), 1860 (XY)
• Elongation at Break: 1.2 % (ZX), 4.2 % (XY)
• Impact Strength Izod notched (kJ/m2): 1.6 (ZX), 2.1 (XZ), 3.3 (XY)
• Impact Strength Izod unnotched (kJ/m2): 4.7 (ZX), 9.6 (XZ), 11.0 (XY)
• HDT @ 0.45 MPa: 65 oC

The best raw materials available is selected from renowned suppliers. Production on state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches. It will perform as expected every time.

All BASF products are 100% traceable to the source.